Marking
001.01.001.XXL.P
SKU
001.–.—.—.- Serial number in our collection
—.01.—.—.- Set Position
—.–.001.—.- Sequence number of the released position
—.–.—.XXL.- Position size
—.–.—.—.P Level of difficulty (A: Amateur, P: Professional)
Color of painting
Beautiful aesthetic look. The degree of gloss is 11-35%.
Material
The volumes are made by molding fiberglass and catalyzed polyester resin. Upon completion of curing and aging, baking the mold, a volume texture is created – a polyurethane coating is applied and sprinkled with microcalcite in a fraction about 0.2 mm. The internal surface of the volume is painted with a polyurethane coating of the same color, minimizing the environmental impact of residual vapors of fiberglass.
Volume fixing points keep metal inserts.
Materials have certificates of conformity and safety data sheets.
Texture
The texture of our volumes is the perfect combination of grip and friction, excellent tactility. We create a balance between excessive abrasiveness and velvety, reducing abrasion and preventing loss of friction because of the chalk.
In our collection there are climbing volumes with a double texture.
Installation and fixation
Before installation it is necessary to check the volume for the presence of chips and cracks. The route setter must use the appropriate fixing system required for this volume, pay attention to the degree of wear of the fastening system and change it in time. Before and after fixing, the route setter checks the degree of adherence of the volume to the surface. The fixation must be done in all required fixing points.
Supplied with screws for fixing volumes 5×50 mm POZIDRIVE or Phillips.
The tightening torque of the screws 4,5-5,0 mm
is varies within 16-19 Nxm.
It is allowed to install a climbing holds on the volumes at the specified fixing points with M16 DIN 912 hexagon bolts. When installing the screw holds on the volumes, it is preferable to use polyurethane holds, while ensuring that the hold base is fully fitted to the surface of the volume, use certified 3,5 mm screws.
Avoid the hard touch of the rope to the surface volume when setting routes of lead climbing.
Operation and maintenance
Volumes designed for sport climbing.
The route setter must regularly check the degree the volume fixation, as well as inspect the surface for chips and cracks. The period of inspections is not regulated and is chosen by the setter depending on the climbing center workload. Installed volumes should be regularly cleaned with a dry brush (with a non-metallic pile). Removed Volumes must be removed once a year and gently cleaned with warm water no more than 40°C, jet pressure must be no more than 50 bar (distance from the nozzle more than 30 cm), without any detergent. Natural drying. Carefully remove the volumes from the wall, paying attention to the size and weight, do not drop them. Store them in a dry ventilated room in the temperature range of +10…+30°C on the shelves. Volume transportation must be done in a rigid package with a reliable fastening.
Service life – 20 (twenty) years.
Repair and recycling
The volumes with bundles of fiberglass and chips or cracks are not allowed to use, they are subject to utilization (Recycling code #95). At the end of the service life the volumes must be utilized.
Logo and lable
Glued on the inside surface of the volume.

Product quality and warranty
The quality of the volumes stated in the contract corresponds to the characteristics of the goods of this kind and the period of use.
The warranty for the new volume is 6 (six) months from the date of purchase. Warranty obligations apply to the cases specified in the warranty card and if the customer follows all the installation and operation instructions. Letter of claim on the fact of marriage (shortage) of goods.
Our volumes meet the requirements of ГОСТ Р 58066.3-2018 Climbing wall (climbing center). Part 3. Safety requirements and testing methods for climbing holds.
Our volumes meet the requirements of ГОСТ ISO 8124-3-2014
Safety of toys. Part 3. Migration of certain elements.